Desiccant dryer
Atlas Copco CD 5+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 11.7 SCFM19.8 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C / -40 °F
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD+ 5-335
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HR4 | 12 SCFM≈ 20 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 2 | North America |
| OMI HL 0030 | 11 SCFM18 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | Worldwide |
| Kaeser DC-HF 3.7 | 13 SCFM≈ 22 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Parker DAS5 | 13 SCFM22.1 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Chicago Pneumatic CPADM-10 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD10 | 10 SCFM20 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 030 | 10 SCFM≈ 17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Quincy QMOD00010 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD+ 5-335 models
Is your product missing?
Request received. We will proceed within 72 hours.