Desiccant dryer
Atlas Copco CD 15+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 31.8 SCFM54 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -70 °C / -100 °F ; -40 °C / -40 °F
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD+ 5-335
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech DHDM 32 | 32 SCFM≈ 54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 32 | 32 SCFM≈ 54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DME015 | 32 SCFM55 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| ZEKS 32ZMA | 32 SCFM≈ 54 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA55IM | ≈ 32 SCFM55 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatic Products (SPX) 30CDA | 31 SCFM≈ 53 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Mikropor MMD30 | 30 SCFM50 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Sullair DMD-30 | 30 SCFM≈ 51 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD+ 5-335 models
Is your product missing?
Request received. We will proceed within 72 hours.