Desiccant dryer
Atlas Copco CD 20+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 42.4 SCFM72 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C / -40 °F
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD+ 5-335
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Parker DME020 | 42 SCFM71 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Ingersoll Rand DA70IM | ≈ 41 SCFM70 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Deltech DHDM 41 | 41 SCFM≈ 70 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 41 | 41 SCFM≈ 70 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification NDL 070N | 41 SCFM≈ 70 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| ZEKS 41ZMA | 41 SCFM≈ 70 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HOF-0040-1 | 40 SCFM≈ 68 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion CDT40 | 40 SCFM≈ 68 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD+ 5-335 models
Is your product missing?
Request received. We will proceed within 72 hours.