Desiccant dryer
Sullair DMD-30
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 30 SCFM≈ 51 m³/h
- Dew point
- -73 to -20 °C (-99.4 to -4 °F)As published: -40 °F std (options -4 °F/-20 °C or -100 °F/-73 °C)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- Sullair
- Line
- DMD (modular)
- Voltage
- 115–230V/1PH
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (control panel)
- CRN
- yes (ASME/CRN)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mikropor MMD30 | 30 SCFM50 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatic Products (SPX) 30CDA | 31 SCFM≈ 53 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Atlas Copco CD 15+ | 31.8 SCFM54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Deltech DHDM 32 | 32 SCFM≈ 54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 32 | 32 SCFM≈ 54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DME015 | 32 SCFM55 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| ZEKS 32ZMA | 32 SCFM≈ 54 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA55IM | ≈ 32 SCFM55 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DMD (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.