Desiccant dryer
Sullair DMD-100
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 100 SCFM≈ 170 m³/h
- Dew point
- -73 to -20 °C (-99.4 to -4 °F)As published: -40 °F std (options -4 °F/-20 °C or -100 °F/-73 °C)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- Sullair
- Line
- DMD (modular)
- Voltage
- 115–230V/1PH
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (control panel)
- CRN
- yes (ASME/CRN)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-100 E | 100 SCFM≈ 170 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0100-1 | 100 SCFM≈ 170 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 100 | 100 SCFM≈ 170 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-100 | 100 SCFM≈ 170 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 100 | 100 SCFM≈ 170 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 185 | 100 SCFM185 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Sullivan-Palatek SPDPR 100 | 100 SCFM≈ 170 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Pneumatic Products (SPX) 100CDA | 96 SCFM≈ 163 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DMD (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.