Lubricated rotary screw compressor
Kaeser SFC 315S
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,825 cfm110 psig (≈ 7.6 bar)
- Power
- n/a
- Type
- Variable speed (VSD)
- Manufacturer
- Kaeser
- Line
- SFC
- Stages
- 1
- Cooling
- Air
- Voltage
- 460 V (data); 575 V consult Kaeser
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,825 cfm | ≈ 51.68 m³/min |
| 125 psig (≈ 8.6 bar) | 1,742 cfm | ≈ 49.33 m³/min |
| 145 psig (≈ 10 bar) | 1,625 cfm | ≈ 46.01 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Sullair LS260V | 1,800 cfm | 110 psig (≈ 7.6 bar) | 350 hp | North America |
| Atlas Copco GA 250 VSD+ | 414 to 1,769 cfm | 125 psig (≈ 8.6 bar) | ≈ 354 hp | Worldwide |
| ELGi EG 250 (VSD) | 635 to 1,475 cfm | 8 bar (≈ 116 psig) | 300 hp | Worldwide |
| Sullivan-Palatek SP25-350 VFD | 1,380.1 acfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| ALUP ALLEGRO 315 | 553 to 1,845 cfm | 8 bar (≈ 116 psig) | 420 hp | Europe / international |
| FINI K-MAX TS 250-08 VS | 595 to 1,803 cfm | 8 bar (≈ 116 psig) | ≈ 335 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SFC models
Is your product missing?
Request received. We will proceed within 72 hours.