Lubricated rotary screw compressor

FINI K-MAX TS 250-08 VS

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 595 to 1,803 cfm8 bar (≈ 116 psig)
Power: ≈ 335 hp250 kW
Type: Variable speed (VSD)
Manufacturer: FINI
Line: K-MAX TS 75-315 kW VS
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
8 bar (≈ 116 psig)	595 to 1,803 cfm	≈ 16.85 to 51.06 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ALUP ALLEGRO 315	553 to 1,845 cfm	8 bar (≈ 116 psig)	420 hp	Europe / international
Atlas Copco GA 250 VSD+	414 to 1,769 cfm	125 psig (≈ 8.6 bar)	≈ 354 hp	Worldwide
Kaeser SFC 315S	1,742 cfm	125 psig (≈ 8.6 bar)	n/a	North America
Sullair LS260V	1,660 cfm	125 psig (≈ 8.6 bar)	350 hp	North America
ELGi EG 250 (VSD)	635 to 1,475 cfm	8 bar (≈ 116 psig)	300 hp	Worldwide
Sullivan-Palatek SP25-350 VFD	1,380.1 acfm	125 psig (≈ 8.6 bar)	350 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?

FINI K-MAX TS 250-08 VS

Published flow by pressure

Comparable models

Other K-MAX TS 75-315 kW VS models