Lubricated rotary screw compressor

FINI K-MAX TS 200-08 VS

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 474 to 1,437 cfm8 bar (≈ 116 psig)
Power: ≈ 268 hp200 kW
Type: Variable speed (VSD)
Manufacturer: FINI
Line: K-MAX TS 75-315 kW VS
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
8 bar (≈ 116 psig)	474 to 1,437 cfm	≈ 13.42 to 40.69 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ALUP ALLEGRO 250	417 to 1,388 cfm	8 bar (≈ 116 psig)	340 hp	Europe / international
Kaeser SFC 250	1,439 cfm	125 psig (≈ 8.6 bar)	n/a	North America
Sullair LS220V	1,440 cfm	125 psig (≈ 8.6 bar)	300 hp	North America
ELGi EG 250 (VSD)	635 to 1,475 cfm	8 bar (≈ 116 psig)	300 hp	Worldwide
Atlas Copco GA 200 VSD+	412 to 1,481 cfm	125 psig (≈ 8.6 bar)	n/a	Worldwide
Sullivan-Palatek SP25-350 VFD	1,380.1 acfm	125 psig (≈ 8.6 bar)	350 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?

FINI K-MAX TS 200-08 VS

Published flow by pressure

Comparable models

Other K-MAX TS 75-315 kW VS models