Lubricated rotary screw compressor
ALUP ALLEGRO 250
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 441 to 1,466 cfm7 bar (≈ 102 psig)
- Power
- 340 hp250 kW
- Type
- Variable speed (VSD)
- Manufacturer
- ALUP
- Line
- ALLEGRO 200-315
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | 441 to 1,466 cfm | ≈ 12.49 to 41.51 m³/min |
| 8 bar (≈ 116 psig) | 417 to 1,388 cfm | ≈ 11.81 to 39.3 m³/min |
| 10 bar (≈ 145 psig) | 398 to 1,324 cfm | ≈ 11.27 to 37.49 m³/min |
| 13 bar (≈ 189 psig) | 354 to 1,157 cfm | ≈ 10.02 to 32.76 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI K-MAX TS 200-08 VS | 474 to 1,437 cfm | 8 bar (≈ 116 psig) | ≈ 268 hp | Europe / international |
| Kaeser SFC 250 | 1,519 cfm | 110 psig (≈ 7.6 bar) | n/a | North America |
| ELGi EG 250 (VSD) | 642 to 1,525 cfm | 7 bar (≈ 102 psig) | 300 hp | Worldwide |
| Sullivan-Palatek SP25-350 VFD | 1,535.6 acfm | 100 psig (≈ 6.9 bar) | 350 hp | North America |
| Sullair LS220V | 1,620 cfm | 100 psig (≈ 6.9 bar) | 300 hp | North America |
| Atlas Copco GA 160 VSD+ 8.5 bar (125 psi) | 214 to 1,176 cfm | 100 psig (≈ 6.9 bar) | 215 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ALLEGRO 200-315 models
Is your product missing?
Request received. We will proceed within 72 hours.