Lubricated rotary screw compressor
Gardner Denver L05
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 28.4 acfm100 psig (≈ 6.9 bar)
- Power
- 7.5 hp5 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 28.4 acfm | ≈ 0.8 m³/min |
| 125 psig (≈ 8.6 bar) | 24.9 acfm | ≈ 0.71 m³/min |
| 190 psig (≈ 13.1 bar) | 18.3 acfm | ≈ 0.52 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser SX 8 | ≈ 28.3 cfm | 7.5 bar (≈ 109 psig) | ≈ 7 hp | Worldwide |
| Hertz Kompressoren HGS 5,5 | ≈ 25.1 cfm | 7.5 bar (≈ 109 psig) | 7.5 hp | Worldwide |
| Champion DRS 10 | 34 cfm | 100 psig (≈ 6.9 bar) | 10 hp | North America |
| Chicago Pneumatic CPM 7.5 | 29 cfm | 0.8 MPa (≈ 116 psig) | 7.5 hp | Europe / international |
| Sullair ST5 (CE) | ≈ 29.3 cfm | 8 bar (≈ 116 psig) | ≈ 7 hp | Europe / international |
| ABAC SPINN 5.5X 8 | ≈ 29.9 cfm | 8 bar (≈ 116 psig) | 7.5 hp | Europe / international |
| FINI MICRO 5.5-08 | 25 cfm | 8 bar (≈ 116 psig) | 7.5 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other L-Series (L04–L290) models
Is your product missing?
Request received. We will proceed within 72 hours.