Desiccant dryer
Nano Purification HL 125
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 127 SCFM216 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Nano Purification
- Line
- D5 HL
- Conditions
- FAD 7 bar, inlet 35 °C, ambient 25 °C
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatech PH 130 HE | 127 SCFM216 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Altec AIR MHR125 | 125 SCFM≈ 212 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Pneumatic Products (SPX) 125CDA | 125 SCFM≈ 212 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Parker DME060 | 130 SCFM221 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Champion XCHL120 | 120 SCFM204 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL120 | 120 SCFM204 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL120 | 120 SCFM204 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD120 | 120 SCFM200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5 HL models
Is your product missing?
Request received. We will proceed within 72 hours.