Desiccant dryer
MTA NST 110
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 417 SCFM709 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0400-4 | 400 SCFM≈ 680 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP400 | 400 SCFM678 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-400 | 400 SCFM≈ 680 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD400 | 400 SCFM680 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH400 | 400 SCFM678 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 400 | 400 SCFM≈ 680 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Sullivan-Palatek SPDH 400 | 400 SCFM≈ 680 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| BEKO Technologies ACH 460 | 460 SCFM≈ 782 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.