Desiccant dryer
MTA NDA-009
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 493 SCFM837 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Kaeser i.DC 140 | ≈ 494 SCFM840 m³/h | -70 to 3 °C (-94 to 37.4 °F) | Class 2 | Europe / international |
| Ultrafilter HL 850 | ≈ 500 SCFM850 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| ALUP AD 800 11 bar | ≈ 466 SCFM792 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 80 B | ≈ 466 SCFM792 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| MARK ADS 130 (11 bar) | 466 SCFM792 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| CompAir AX150TF | ≈ 530 SCFM900 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| FINI HDT 130 | 452 SCFM768 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Aircel AHLD-500 E | 500 SCFM≈ 850 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (alumina) models
Is your product missing?
Request received. We will proceed within 72 hours.