Desiccant dryer
MTA NDA-016
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 2,085 SCFM3,543 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| FINI HDT 620 | 2,208 SCFM3,750 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| CompAir AX550TL | ≈ 1,942 SCFM3,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Champion XCHL2100 | 2,100 SCFM3,570 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-2100 | 2,100 SCFM≈ 3,568 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver DGH2100 | 2,100 SCFM≈ 3,568 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Hankison HHX-2100 | 2,100 SCFM3,568 m³/h | -73.3 to -20 °C (-99.9 to -4 °F) | Classes 1, 2, 3 | North America |
| Ingersoll Rand HL2100 | 2,100 SCFM3,570 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Kaeser KAD 2100 | 2,100 SCFM≈ 3,568 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (alumina) models
Is your product missing?
Request received. We will proceed within 72 hours.