Desiccant dryer
MTA NDA-004
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 138 SCFM235 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| FINI HDT 40 | 138 SCFM234 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 39 | 138 SCFM234 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| ALUP AD 235 | ≈ 138 SCFM234 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Worthington Creyssensac DB 235 | ≈ 138 SCFM234 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| BEKO Technologies AC 423 | ≈ 132 SCFM225 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Ultrafilter HL 225 | ≈ 132 SCFM225 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| Mattei DD 120 | 132 SCFM222 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Kaeser i.DC 34 | ≈ 120 SCFM204 m³/h | -70 to 3 °C (-94 to 37.4 °F) | Class 2 | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (alumina) models
Is your product missing?
Request received. We will proceed within 72 hours.