Desiccant dryer
MTA NDA-003
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 95 SCFM161 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| MARK ADS 27 | 95 SCFM162 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| ALUP AD 160 | ≈ 95 SCFM162 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Worthington Creyssensac DB 160 | ≈ 95 SCFM162 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Ultrafilter HL 150 | ≈ 88 SCFM150 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| FINI HDT 25 | 88 SCFM150 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Atlas Copco CD 45+ | 95 SCFM162 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Ingersoll Rand D160ILA | ≈ 94 SCFM160 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| OMI HLA 160 Pro | 94 SCFM160 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (alumina) models
Is your product missing?
Request received. We will proceed within 72 hours.