Desiccant dryer
Mattei DDH 7200
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 4,238 SCFM7,200 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Blower purge
- Manufacturer
- Mattei
- Line
- DDH 850-10800
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies FRL 4200 | 4,200 SCFM≈ 7,136 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Hankison HBP4300 | 4,300 SCFM≈ 7,306 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KBD 4300 | 4,300 SCFM≈ 7,306 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Pneumatic Products (SPX) IBP4300 | 4,300 SCFM≈ 7,306 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Ingersoll Rand D7000IBA | ≈ 4,120 SCFM7,000 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Pneumatech PB 4450 HE | ≈ 4,450 SCFM7,560 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HBP-4000-4 | 4,000 SCFM≈ 6,796 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Gardner Denver GBPD4000 | 4,000 SCFM≈ 6,796 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DDH 850-10800 models
Is your product missing?
Request received. We will proceed within 72 hours.