Desiccant dryer
Mattei DDH 1500
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 883 SCFM1,500 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Blower purge
- Manufacturer
- Mattei
- Line
- DDH 850-10800
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Hankison HBP900 | 900 SCFM≈ 1,529 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KBD 900 | 900 SCFM≈ 1,529 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Pneumatic Products (SPX) IBP900 | 900 SCFM≈ 1,529 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies FRL 850 | 850 SCFM≈ 1,444 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Quincy QBP-850 | 850 SCFM≈ 1,444 m³/h | -40 to -12.2 °C (-40 to 10 °F) | Classes 2, 4 (derived) | North America |
| Atlas Copco BD 400+ | 848 SCFM1,440 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Nano Purification BP 1020 | ≈ 848 SCFM1,440 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Ingersoll Rand D1400IBA | ≈ 824 SCFM1,400 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DDH 850-10800 models
Is your product missing?
Request received. We will proceed within 72 hours.