Desiccant dryer
Hankison HHL-1130
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,130 SCFM1,920 m³/h
- Dew point
- -73.3 to 3.3 °C (-99.9 to 37.9 °F)As published: -100/-40/-4/+38 °F (classes 1-4, fixed cycles)
- ISO 8573-1 class
- Classes 1, 2, 3, 4
- Type
- Heatless
- Manufacturer
- Hankison
- Line
- HHL
- Conditions
- @100 psi
- Voltage
- 100-240V/1ph/50-60Hz or 12-24 VDC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes : « Pressure vessels are CRN and ASME Certified »
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion CDT1130 | 1,130 SCFM≈ 1,920 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH1130 | 1,130 SCFM≈ 1,920 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Kaeser KAD 1130 | 1,130 SCFM≈ 1,920 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Quincy QHD-1100 | 1,123 SCFM≈ 1,908 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| OMI HLA 2000 | 1,176 SCFM2,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Ingersoll Rand D2000ILA | ≈ 1,177 SCFM2,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR MHR1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| BEKO Technologies XCp 1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHL models
Is your product missing?
Request received. We will proceed within 72 hours.