Desiccant dryer
Champion CDT1130
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,130 SCFM≈ 1,920 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (class 2) or -100 °F (class 1), selectable
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Champion
- Line
- CDT
- Voltage
- 85-264 VAC 47-63 Hz or 11.5-28 VDC (controller)
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Gardner Denver DGH1130 | 1,130 SCFM≈ 1,920 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Hankison HHX-1130 | 1,130 SCFM1,920 m³/h | -73.3 to -20 °C (-99.9 to -4 °F) | Classes 1, 2, 3 | North America |
| Kaeser KAD 1130 | 1,130 SCFM≈ 1,920 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Quincy QHD-1100 | 1,123 SCFM≈ 1,908 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| OMI HLA 2000 | 1,176 SCFM2,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Ingersoll Rand D2000ILA | ≈ 1,177 SCFM2,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR MHR1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| BEKO Technologies XCp 1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CDT models
Is your product missing?
Request received. We will proceed within 72 hours.