Desiccant dryer
Champion CDT260
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 260 SCFM≈ 442 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (class 2) or -100 °F (class 1), selectable
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Champion
- Line
- CDT
- Voltage
- 85-264 VAC 47-63 Hz or 11.5-28 VDC (controller)
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Gardner Denver DGH260 | 260 SCFM≈ 442 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Hankison HHX-260 | 260 SCFM442 m³/h | -73.3 to -20 °C (-99.9 to -4 °F) | Classes 1, 2, 3 | North America |
| Kaeser KAD 260 | 260 SCFM≈ 442 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Hertz Kompressoren HDA 440 | 259 SCFM439.8 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatic Products (SPX) 265CDA | 263 SCFM≈ 447 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Aircel AHLD-250 E | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| BEKO Technologies XCp 250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CDT models
Is your product missing?
Request received. We will proceed within 72 hours.