Desiccant dryer
BEKO Technologies XCp 250
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 250 SCFM≈ 425 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F std / -100 °F optional
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT XCp
- Voltage
- 120 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (controller)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-250 E | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL250 | 250 SCFM426 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL250 | 250 SCFM426 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL250 | 250 SCFM426 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 250 | 250 SCFM≈ 425 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 440 | 250 SCFM440 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT XCp models
Is your product missing?
Request received. We will proceed within 72 hours.