Desiccant dryer
Hankison HHL-1550
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,550 SCFM2,634 m³/h
- Dew point
- -73.3 to 3.3 °C (-99.9 to 37.9 °F)As published: -100/-40/-4/+38 °F (classes 1-4, fixed cycles)
- ISO 8573-1 class
- Classes 1, 2, 3, 4
- Type
- Heatless
- Manufacturer
- Hankison
- Line
- HHL
- Conditions
- @100 psi
- Voltage
- 100-240V/1ph/50-60Hz or 12-24 VDC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes : « Pressure vessels are CRN and ASME Certified »
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion CDT1550 | 1,550 SCFM≈ 2,633 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH1550 | 1,550 SCFM≈ 2,633 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Kaeser KAD 1550 | 1,550 SCFM≈ 2,633 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Hertz Kompressoren HDA 2700 | 1,589 SCFM2,700 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-1500 E | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-1500-1 | 1,500 SCFM≈ 2,549 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 1500 | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-1500 | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHL models
Is your product missing?
Request received. We will proceed within 72 hours.