Desiccant dryer
BEKO Technologies FRP 5000
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 2,943 SCFM5,000 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2
- Type
- Blower purge
- Manufacturer
- BEKO Technologies
- Line
- EVERDRY FRP
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei DDH 5000 | ≈ 2,931 SCFM4,980 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| Nano Purification BP 3390 | ≈ 2,966 SCFM5,040 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Atlas Copco BD 1400+ | 2,968 SCFM5,040 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Altec AIR HBP-3000-4 | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHB3000 | 3,000 SCFM5,094 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Gardner Denver GBPD3000 | 3,000 SCFM≈ 5,097 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
| Great Lakes Air GBS-3000-t | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand HB3000 | 3,000 SCFM5,094 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other EVERDRY FRP models
Is your product missing?
Request received. We will proceed within 72 hours.