Desiccant dryer
BEKO Technologies FRP 6000
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 3,531 SCFM6,000 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2
- Type
- Blower purge
- Manufacturer
- BEKO Technologies
- Line
- EVERDRY FRP
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei DDH 6300 | ≈ 3,708 SCFM6,300 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| Gardner Denver GBPD3500 | 3,500 SCFM≈ 5,947 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
| Great Lakes Air GBS-3500-t | 3,500 SCFM≈ 5,947 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification BP 3500 | 3,500 SCFM≈ 5,947 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HBP3600 | 3,600 SCFM≈ 6,116 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KBD 3600 | 3,600 SCFM≈ 6,116 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Pneumatic Products (SPX) IBP3600 | 3,600 SCFM≈ 6,116 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Atlas Copco BD 1600 | 3,392 SCFM5,760 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other EVERDRY FRP models
Is your product missing?
Request received. We will proceed within 72 hours.