Desiccant dryer
BEKO Technologies FRP 1100
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 647 SCFM1,100 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2
- Type
- Blower purge
- Manufacturer
- BEKO Technologies
- Line
- EVERDRY FRP
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei DDH 1000 | ≈ 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| Ingersoll Rand D1100IBA | ≈ 647 SCFM1,100 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HBP-0650-4 | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Gardner Denver GBPD650 | 650 SCFM≈ 1,104 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
| Great Lakes Air GBS-650-t | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Atlas Copco BD 300+ | 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QBP-635 | 635 SCFM≈ 1,079 m³/h | -40 to -12.2 °C (-40 to 10 °F) | Classes 2, 4 (derived) | North America |
| Champion XCHB600 | 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other EVERDRY FRP models
Is your product missing?
Request received. We will proceed within 72 hours.