Desiccant dryer
Quincy QBP-635
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 635 SCFM≈ 1,079 m³/h
- Dew point
- -40 to -12.2 °C (-40 to 10 °F)As published: +10 °F to -40 °F
- ISO 8573-1 class
- Classes 2, 4 (derived)
- Type
- Blower purge
- Manufacturer
- Quincy
- Line
- QBP
- Conditions
- @100 psig
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco BD 300+ | 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Ingersoll Rand D1100IBA | ≈ 647 SCFM1,100 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HBP-0650-4 | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Gardner Denver GBPD650 | 650 SCFM≈ 1,104 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
| Great Lakes Air GBS-650-t | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHB600 | 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Hankison HBP600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KBD 600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QBP models
Is your product missing?
Request received. We will proceed within 72 hours.