Desiccant dryer
BEKO Technologies ACC 75
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 75 SCFM≈ 127 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (flow at -100 °F also stated)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACC
- Voltage
- 12-24 VDC / 100-240 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0075-1 | 75 SCFM≈ 127 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-75 | 75 SCFM≈ 127 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD75 | 75 SCFM130 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Sullair DMD-75 | 75 SCFM≈ 127 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Atlas Copco CD 35+ | 74 SCFM126 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Pneumatech PH 75 HE | 74 SCFM126 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Hertz Kompressoren HDA 130 | 77 SCFM130.2 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-70 E | 70 SCFM≈ 119 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACC models
Is your product missing?
Request received. We will proceed within 72 hours.