Desiccant dryer
Aircel AHLD-70 E
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 70 SCFM≈ 119 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (CDP: -100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Aircel
- Line
- AHLD E-Series
- Conditions
- CAGI ADF 200 @100 psig/100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatic Products (SPX) 70CDA | 68 SCFM≈ 116 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Atlas Copco CD 35+ | 74 SCFM126 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Nano Purification NDL 090N | 66 SCFM≈ 112 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Pneumatech PH 75 HE | 74 SCFM126 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Altec AIR HLD-0075-1 | 75 SCFM≈ 127 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies ACC 75 | 75 SCFM≈ 127 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-75 | 75 SCFM≈ 127 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD75 | 75 SCFM130 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other AHLD E-Series models
Is your product missing?
Request received. We will proceed within 72 hours.