Lubricated rotary screw compressor
Kaeser SFC 315
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 2,164 cfm110 psig (≈ 7.6 bar)
- Power
- n/a
- Type
- Variable speed (VSD)
- Manufacturer
- Kaeser
- Line
- SFC
- Stages
- 1
- Cooling
- Air
- Voltage
- 460 V (data); 575 V consult Kaeser
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 2,164 cfm | ≈ 61.28 m³/min |
| 125 psig (≈ 8.6 bar) | 2,057 cfm | ≈ 58.25 m³/min |
| 145 psig (≈ 10 bar) | 1,814 cfm | ≈ 51.37 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Atlas Copco GA 315 VSD+ | 414 to 2,116 cfm | 125 psig (≈ 8.6 bar) | ≈ 429 hp | Worldwide |
| Sullair LS260V | 1,800 cfm | 110 psig (≈ 7.6 bar) | 350 hp | North America |
| FINI K-MAX TS 315-08 VS | 717 to 2,172 cfm | 8 bar (≈ 116 psig) | ≈ 422 hp | Europe / international |
| ALUP ALLEGRO 315 | 553 to 1,845 cfm | 8 bar (≈ 116 psig) | 420 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SFC models
Is your product missing?
Request received. We will proceed within 72 hours.