Lubricated rotary screw compressor
Kaeser SFC 160
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,177 cfm110 psig (≈ 7.6 bar)
- Power
- n/a
- Type
- Variable speed (VSD)
- Manufacturer
- Kaeser
- Line
- SFC
- Stages
- 1
- Cooling
- Air
- Voltage
- 460 V (data); 575 V consult Kaeser
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,177 cfm | ≈ 33.33 m³/min |
| 125 psig (≈ 8.6 bar) | 1,105 cfm | ≈ 31.29 m³/min |
| 145 psig (≈ 10 bar) | 1,037 cfm | ≈ 29.36 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 200 (VSD) | 520 to 1,218 cfm | 8 bar (≈ 116 psig) | 250 hp | Worldwide |
| Sullivan-Palatek SP25-250 VFD | 1,129.1 acfm | 125 psig (≈ 8.6 bar) | 250 hp | North America |
| Sullair LS190V | 1,250 cfm | 110 psig (≈ 7.6 bar) | 250 hp | North America |
| Atlas Copco GA 160 VSD+ 8.5 bar (125 psi) | 208 to 1,049 cfm | 132 psig (≈ 9.1 bar) | 215 hp | Worldwide |
| ALUP ALLEGRO 200 | 352 to 1,170 cfm | 8 bar (≈ 116 psig) | 270 hp | Europe / international |
| FINI K-MAX TS 160-08 VS | 385 to 1,165 cfm | 8 bar (≈ 116 psig) | ≈ 214 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SFC models
Is your product missing?
Request received. We will proceed within 72 hours.