Lubricated rotary screw compressor

Kaeser DSD 175

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 909 cfm125 psig (≈ 8.6 bar)
Power: n/a
Type: Fixed speed
Manufacturer: Kaeser
Line: DSD
Stages: 1
Cooling: Air, or water depending on version
Voltage: 460/575 V (series)
Frequency: 60 Hz
Brochure market: North America
CSA: n/a
CRN: ASME/CRN mention (receiver/vessel)
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
125 psig (≈ 8.6 bar)	909 cfm	≈ 25.74 m³/min
175 psig (≈ 12.1 bar)	696 cfm	≈ 19.71 m³/min
217 psig (≈ 15 bar)	558 cfm	≈ 15.8 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ELGi EG 160P	908 cfm	9.5 bar (≈ 138 psig)	200 hp	Worldwide
Atlas Copco GA 160 Xtreme	928.7 cfm	8.5 bar (≈ 123 psig)	215 hp	Worldwide
Sullivan-Palatek SP25-200	933.8 acfm	125 psig (≈ 8.6 bar)	200 hp	North America
Gardner Denver L160	843.1 acfm	145 psig (≈ 10 bar)	215 hp	Worldwide
Sullair LS160 (CE)	≈ 964.1 cfm	10 bar (≈ 145 psig)	≈ 214 hp	Europe / international
ALUP LARGO 200	1,070 cfm	10 bar (≈ 145 psig)	270 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other DSD models

Is your product missing?