Desiccant dryer
Pneumatic Products (SPX) 630DHA
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 630 SCFM≈ 1,070 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Pneumatic Products (SPX)
- Line
- DHA Heat-Les
- Conditions
- @100 psig, -40 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Quincy QHD-635 | 635 SCFM≈ 1,079 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Nano Purification HL 635 | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatech PH 635 HE | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco CD 300+ | 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Altec AIR MHR620 | 620 SCFM≈ 1,053 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Hankison HHL 1051 | ≈ 618 SCFM1,050 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies XCe 650 | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Chicago Pneumatic CPAD-650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DHA Heat-Les models
Is your product missing?
Request received. We will proceed within 72 hours.