Desiccant dryer
Pneumatic Products (SPX) 30CDA
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 31 SCFM≈ 53 m³/h
- Dew point
- -73 °C (-99.4 °F)As published: -100 °F (-73 °C)
- ISO 8573-1 class
- Class 1 (derived)
- Type
- Heatless
- Manufacturer
- Pneumatic Products (SPX)
- Line
- CDA Heat-Les
- Conditions
- @100 psig, -100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 15+ | 31.8 SCFM54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Deltech DHDM 32 | 32 SCFM≈ 54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 32 | 32 SCFM≈ 54 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD30 | 30 SCFM50 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker DME015 | 32 SCFM55 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Sullair DMD-30 | 30 SCFM≈ 51 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| ZEKS 32ZMA | 32 SCFM≈ 54 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA55IM | ≈ 32 SCFM55 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CDA Heat-Les models
Is your product missing?
Request received. We will proceed within 72 hours.