Desiccant dryer
Nano Purification HL 0350
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 350 SCFM≈ 595 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °F (optional -94 °F)
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Nano Purification
- Line
- D5 HL (US)
- Conditions
- @100 psig, 100 °F, PDP -40 °F
- Voltage
- 115/1/60 (optional 230/1/60, 12 VDC)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- UL/cUL 508A
- CRN
- yes (vessels CRN ≤ HL 1500)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-350 E | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR350 | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Atlas Copco CD 165+ | 350 SCFM594 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Chicago Pneumatic CPAD-350 | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 350 | 350 SCFM≈ 595 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD HC 340 | 340 SCFM575 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker MX103C | 360 SCFM612 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Pneumatic Products (SPX) 360DHA | 360 SCFM≈ 612 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5 HL (US) models
Is your product missing?
Request received. We will proceed within 72 hours.