Desiccant dryer
MTA NST 630
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 2,392 SCFM4,064 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MEH 2400 | 2,400 SCFM≈ 4,078 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| BEKO Technologies ACH 2350 | 2,350 SCFM≈ 3,993 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 1100 | ≈ 2,331 SCFM3,960 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HRE-2500-4 | 2,500 SCFM≈ 4,248 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Sullivan-Palatek SPDH 2500 | 2,500 SCFM≈ 4,248 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-2200 | 2,200 SCFM≈ 3,738 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD2200 | 2,200 SCFM3,738 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Kaeser KED 2200 | 2,200 SCFM≈ 3,738 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.