Desiccant dryer
MTA NST 510
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 1,936 SCFM3,290 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-2000-4 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Nano Purification EH 2000 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Quincy QHP-2000 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullair SAH2000 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Atlas Copco AD 970 | 2,056 SCFM3,492 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Champion XCHP1800 | 1,800 SCFM3,060 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-1800 | 1,800 SCFM≈ 3,058 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1800 | 1,800 SCFM3,058 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.