Desiccant dryer
Atlas Copco AD 970
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,056 SCFM3,492 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C / -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Atlas Copco
- Line
- AD 360-1600
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- yes (stated in brochure)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion XCHP2100 | 2,100 SCFM3,570 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH2100 | 2,100 SCFM3,570 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MEH 2100 | 2,100 SCFM≈ 3,568 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Sullivan-Palatek SPDH 2100 | 2,100 SCFM≈ 3,568 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Altec AIR HRE-2000-4 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Nano Purification EH 2000 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Quincy QHP-2000 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullair SAH2000 | 2,000 SCFM≈ 3,398 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other AD 360-1600 models
Is your product missing?
Request received. We will proceed within 72 hours.