Desiccant dryer
MTA NST 140
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 531 SCFM903 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0550-4 | 550 SCFM≈ 934 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP500 | 500 SCFM852 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD500 | 500 SCFM850 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH500 | 500 SCFM852 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 500 | 500 SCFM≈ 850 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Mattei MEH 500 | 500 SCFM≈ 850 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 0500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.