Desiccant dryer
MTA NST 1380
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 5,240 SCFM8,903 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-5000-4 | 5,000 SCFM≈ 8,495 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Ingersoll Rand EH5000 | 5,000 SCFM8,496 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MEH 5000 | 5,000 SCFM≈ 8,495 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 2200 | ≈ 4,662 SCFM7,920 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies ACH 4050 | 4,050 SCFM≈ 6,881 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.