Desiccant dryer
Mikropor MMD25
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 25 SCFM45 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Mikropor
- Conditions
- reference 35 °C, 7 bar
- Voltage
- 115-240/1/50-60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0025-1 | 25 SCFM≈ 42 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies ACC 25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPADM-25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Quincy QMOD00025 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Sullair DMD-25 | 25 SCFM≈ 42 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Atlas Copco CD 12+ | 25.4 SCFM43.2 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Deltech DHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MMD / MMD HC (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.