Desiccant dryer
Altec AIR HLD-0025-1
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 25 SCFM≈ 42 m³/h
- Dew point
- -73 °C (-99.4 °F)As published: -100 °F / -73 °C
- ISO 8573-1 class
- Class 1
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- HLD basse PDP
- Voltage
- 120/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies ACC 25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPADM-25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD25 | 25 SCFM45 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Quincy QMOD00025 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Sullair DMD-25 | 25 SCFM≈ 42 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Atlas Copco CD 12+ | 25.4 SCFM43.2 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Deltech DHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HLD basse PDP models
Is your product missing?
Request received. We will proceed within 72 hours.