Desiccant dryer
Quincy QMOD00025
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 25 SCFM≈ 42 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (class 1.1.1 -100 °F possible)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Quincy
- Line
- QMOD (modular)
- Conditions
- @100 psig, 95 °F
- Voltage
- universal (stated in brochure)
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes (except Alberta)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0025-1 | 25 SCFM≈ 42 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies ACC 25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPADM-25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD25 | 25 SCFM45 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Sullair DMD-25 | 25 SCFM≈ 42 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Atlas Copco CD 12+ | 25.4 SCFM43.2 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Deltech DHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QMOD (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.