Desiccant dryer
Quincy QMOD00015
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 15 SCFM≈ 25 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (class 1.1.1 -100 °F possible)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Quincy
- Line
- QMOD (modular)
- Conditions
- @100 psig, 95 °F
- Voltage
- universal (stated in brochure)
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes (except Alberta)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0015-1 | 15 SCFM≈ 25 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies ACC 15 | 15 SCFM≈ 25 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPADM-15 | 15 SCFM≈ 25 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Deltech DHDM 15 | 15 SCFM≈ 25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 15 | 15 SCFM≈ 25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD15 | 15 SCFM25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 040 | 15 SCFM≈ 25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DAS6 | 15 SCFM25.5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QMOD (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.