Desiccant dryer
Hankison PHDM 147
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 147 SCFM≈ 250 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °F/-40 °C (class 2) or -94 °F/-70 °C (class 1), selectable
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Hankison
- Line
- PHDM (modular)
- Conditions
- @100 psig
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- yes : CSA C22.2 No.0-10 / No.14-18 & UL 508
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech DHDM 147 | 147 SCFM≈ 250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hertz Kompressoren HDA 250 | 147 SCFM250.2 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| ZEKS 147ZMA | 147 SCFM≈ 250 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA250IM | ≈ 147 SCFM250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatech PH 150 HE | 148 SCFM252 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Aircel AHLD-150 E | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR150 | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-150 | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other PHDM (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.