Desiccant dryer
Pneumatech PH 150 HE
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 148 SCFM252 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °F (optional -70 °C/-94 °F)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Pneumatech
- Voltage
- 115 V or 230 V, 60 Hz
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand DA250IM | ≈ 147 SCFM250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Deltech DHDM 147 | 147 SCFM≈ 250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 147 | 147 SCFM≈ 250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hertz Kompressoren HDA 250 | 147 SCFM250.2 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| ZEKS 147ZMA | 147 SCFM≈ 250 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Aircel AHLD-150 E | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR150 | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-150 | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other PH 55-310 HE (US) models
Is your product missing?
Request received. We will proceed within 72 hours.