Desiccant dryer
Hankison HHS-260
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 260 SCFM442 m³/h
- Dew point
- -73.3 to -20 °C (-99.9 to -4 °F)As published: -100/-40/-4 °F (classes 1-3, selectable; on demand in cl. 2-3)
- ISO 8573-1 class
- Classes 1, 2, 3
- Type
- Heatless
- Manufacturer
- Hankison
- Line
- HHS
- Conditions
- @100 psi
- Voltage
- 100-240V/1ph/50-60Hz or 12-24 VDC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes : « Pressure vessels are CRN and ASME Certified »
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion CDT260 | 260 SCFM≈ 442 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH260 | 260 SCFM≈ 442 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Kaeser KAD 260 | 260 SCFM≈ 442 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Hertz Kompressoren HDA 440 | 259 SCFM439.8 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatic Products (SPX) 265CDA | 263 SCFM≈ 447 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Aircel AHLD-250 E | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| BEKO Technologies XCp 250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHS models
Is your product missing?
Request received. We will proceed within 72 hours.