Desiccant dryer
Chicago Pneumatic CPAD-3100
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 3,100 SCFM≈ 5,267 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (optional -100 °F)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Chicago Pneumatic
- Line
- CPAD
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- n/a
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Hankison HHL 5201 | ≈ 3,061 SCFM5,200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-3000 E | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR3000 | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion CDT3000 | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH3000 | 3,000 SCFM≈ 5,097 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Kaeser KAD 3000 | 3,000 SCFM≈ 5,097 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Mattei MHL 3000 | 3,000 SCFM≈ 5,097 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 5000 | 3,000 SCFM5,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CPAD models
Is your product missing?
Request received. We will proceed within 72 hours.