Desiccant dryer
Mattei MHL 3000
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 3,000 SCFM≈ 5,097 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °F (optional -94 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Mattei
- Line
- MHL
- Conditions
- ADF 100 (100 °F, -40 °F)
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- UL/cUL
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-3000 E | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR3000 | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion CDT3000 | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH3000 | 3,000 SCFM≈ 5,097 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Hankison HHX-3000 | 3,000 SCFM5,097 m³/h | -73.3 to -20 °C (-99.9 to -4 °F) | Classes 1, 2, 3 | North America |
| Kaeser KAD 3000 | 3,000 SCFM≈ 5,097 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Mikropor MDA 5000 | 3,000 SCFM5,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Hertz Kompressoren HDA 5000 | 2,943 SCFM4,998 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MHL models
Is your product missing?
Request received. We will proceed within 72 hours.