Desiccant dryer
Mattei MHL 1500
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,500 SCFM≈ 2,549 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °F (optional -94 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Mattei
- Line
- MHL
- Conditions
- ADF 100 (100 °F, -40 °F)
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- UL/cUL
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-1500 E | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-1500-1 | 1,500 SCFM≈ 2,549 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 1500 | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL1500 | 1,500 SCFM2,550 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-1500 | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL1500 | 1,500 SCFM2,550 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL1500 | 1,500 SCFM2,550 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MDA 2700 | 1,500 SCFM2,700 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MHL models
Is your product missing?
Request received. We will proceed within 72 hours.